HTB1j9naFVXXXXXGXpXXq6xXFXXXx

Rubitec 10kva 96v (10000w)pure sine wave Power Star Inverter

654,000.00

Pure sine wave output, available for sensitive load
4-step progressive charging, 7 battery type selector
Fast and powerful charger with 35A and 70A
Accept generator’s energy output
High power factor
Automatically transfer between battery and line modes
Microprocessor control guarantees high reliability
Bypass without battery connected
Remote control function
Protection against:
Over load, over temperature, over charging, low battery
Reverse connection(optional by hard connector)

LW specifications
Model No. LW1000 LW2000 LW3000 LW4000 LW5000 LW6000
Nominal Power 1000W 2000W 3000W 4000W 5000W 6000W
AC Input
Phase & waveform Single phase & Pure Sine Wave
Voltage 120VAC/230VAC
Acceptable Voltage 194-243VAC\164-243VAC(wide mode)
Line Low Transfer 85V±4%/184(154 wide mode±4%)
Line Low Return 95V±4%/194(164 wide mode±4%)
Line high Transfer 135V±4%/253±4%
Line high Return 127V±4%/243±4%
Frequency 50Hz or 60Hz (auto sensing)
Line Low Transfer 47Hz for 50Hz,57Hz for 60Hz
Line high Transfer 55Hz for 50Hz,65Hz for 60Hz
Output
Phase & waveform Single phase & Pure Sine Wave(bypass mode sync to input)
Voltage 120/220/230/240VAC(bypass mode sync to input)
Voltage Regulation ±10%rms(bypass mode sync to input)
Frequency 50Hz±0.3Hz(bypass mode sync to input)
Peak Power 3 times of rating power
Short Circuit Protection Yes,shutdown after 10ms
Power Factor 0.9-1.0
DC Input
Battery Voltage 12V/24V 12V/24V/48V 24V/48V
Minimum Start Voltage 10V for 12V,20V for 24V,40V for 48V
Low Battery Alarm 10.5V for 12V,21V for 24V,42V for 48V
Low Battery Transfer 10V for 12V,20V for 24V,40V for 48V
High Voltage Alarm 16V for 12V,32V for 24V,64V for 48V
Max Charging Current 35A/70A
Over Charge Voltage 15.7V for 12V,31.4V for 24V,62.8V for 48V
Transfer Efficiency
Line Mode >95%
Battery Mode >88%
power saver Available when the load is less than 25 Watts
Indicators
7-LED Display From the right to the left,LED1 line mode (green lighting),LED2 inverter mode
(green lighting),LED3 charging mode(yellow lighting),LED4 Fully charged
(green lighting),LED5 over heat shutdown(red lighting),LED6 Overloaded
shutdown(red lighting),LED7 Saving Mode(green lighting)
3-LED Display Charging Mode(green lighting),inverter mode(green lighting), Alarm(red lighting)
Switch selector Saving Mode is on/off when push the switch forwards/backwards,   keeping it horisontal is
turning the inverter off.
Audible Alarm Sounding when the heatsink’s tem is over 105°C and shutdown after 30 seconds.
Protections low battery,over charging,over temp,over load
Communications RS-232/USB(custom-made)
Enviromental
Operating Environment 0-40°C,0-90%RH(non-condensing)
Audible Noise <60dB
Physical
Net Weight(KG) 18 20 22 35 38 40
Dimension,D X W X H(mm) 218X179X442 218X179X598

 

View Detail
Compare
SKU: RT10000 Categories: ,

Reviews

There are no reviews yet.

Be the first to review “Rubitec 10kva 96v (10000w)pure sine wave Power Star Inverter”

Your email address will not be published. Required fields are marked *