Showing 13–24 of 24 results

  • 20A_PWM_Solar_Charge_Controller 2B

    EP Solar Charge Controller 20Amps 12/24V with LCD Display

    0 out of 5
    20,000.00

    The controller is for off-grid solar system, and protects the battery from being over charged by the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults.

    Features:

    • ·32 bit MCU with high speed and high performance
    • ·12 bit A/D high-precision sampling to ensure accuracy
    • ·Excellent EMC design
    • ·Nominal system voltage automatic recognition
    • ·High efficient Series PWM charging, increase the battery lifetime and improve the solar system performance
    • ·Use MOSFET as electronic switch, without any mechanical switch
    • ·Widely used, automatically recognize day/night
    • Adopt graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu displaying and operation
    • · Humanized design of browser interface, undertake every operating conveniently
    • · Full control parameters setting and modification, diversified load control mode Gel, Sealed and Flooded battery type option
    • ·Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve the battery lifetime
    • ·Electronic protection: Overheating, over charging, over discharging, overload, and short circuit.
    • ·Reverse protection: any combination of solar module and battery

    Add to cart
  • 50A_Solar_Controller_VS5048N_with_LCD_Display_Optional (1)

    EP Solar Charge Controller 45Amps 12/24/36/48V with LCD Display

    0 out of 5
    55,000.00

    VS SERIES solar controller is for off-grid solar system, and protects the battery from being over charged by the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults.

    Features:

    • ·32 bit MCU with high speed and high performance
    • ·12 bit A/D high-precision sampling to ensure accuracy
    • ·Excellent EMC design
    • ·Nominal system voltage automatic recognition
    • ·High efficient Series PWM charging, increase the battery lifetime and improve the solar system performance
    • ·Use MOSFET as electronic switch, without any mechanical switch
    • ·Widely used, automatically recognize day/night
    • · Adopt graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu displaying and operation
    •  Humanized design of browser interface, undertake every operating conveniently
    •  Full control parameters setting and modification, diversified load control mode
    • Gel, Sealed and Flooded battery type option
    • Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve the battery lifetime
    • ·Electronic protection: Overheating, over charging, over discharging, overload, and short circuit.
    • ·Reverse protection: any combination of solar module and battery

     


    Add to cart
  • 60A_Solar_Charge_Controller_with_LCD_VS6048N

    EP Solar Charge Controller 60Amps 12/24/36/48V with LCD Display

    0 out of 5
    65,000.00

    60ASOLAR CHARGE CONTROLLER VS6048N

    The controller is for off-grid solar system, and protects the battery from being over charged by the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults.

    Features:

    • ·32 bit MCU with high speed and high performance
    • ·12 bit A/D high-precision sampling to ensure accuracy
    • ·Excellent EMC design
    • ·Nominal system voltage automatic recognition
    • ·High efficient Series PWM charging, increase the battery lifetime and improve the solar system performance
    • ·Use MOSFET as electronic switch, without any mechanical switch
    • ·Widely used, automatically recognize day/night
    • Adopt graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu displaying and operation
    •  Humanized design of browser interface, undertake every operating conveniently
    •  Full control parameters setting and modification, diversified load control mode
    • Gel, Sealed and Flooded battery type option
    • Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve the battery lifetime
    • Electronic protection: Overheating, over charging, over discharging, overload, and short circuit.
    • ·Reverse protection: any combination of solar module and battery

    Add to cart
  • ChargeControllers 30AH

    EP Solar Panel Charge Controller 30Amps-12/24V with LCD Display

    0 out of 5
    35,000.00

    Brand New PWM 30A Solar Charge Controller Panel Regulator 12V 24V. The Solar lighting Controller for solar system with automatic lighting control and time functions. The Solar Controller is designed with a microcontroller for automatic lighting control functions.

    Specifications

    General Features
    Features LED Indicators
    Interface 6
    Model ID M-20845888
    Model Name Solar Charger Controller
    Output Power 30 A / 12 V
    Type

    Add to cart
  • ChargeControllers 2

    EP Solar Panel Charge Controller 45Amps-12/24/36/48V with LCD Display

    0 out of 5
    58,000.00

     

    Brand New PWM 45A Solar Charge Controller Panel Regulator 12/24/36/48V. The Solar lighting Controller for solar system with automatic lighting control and time functions. The Solar Controller is designed with a microcontroller for automatic lighting control functions.

    Specifications

    General Features
    Features LED Indicators
    Interface 6
    Model ID M-20845888
    Model Name Solar Charger Controller
    Output Power 45 A / 12/24/36/48 V

    Add to cart
  • Morningstar-TriStar-Digital-Meter-2-TS---M---2-3984202

    Morningstar TriStar Digital Meter-2 TS – M – 2

    0 out of 5
    36,500.00

    The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meter enables manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance. It is worth the time getting to know your meter!

    The TriStar Meter-2™ (TS-M-2), TriStar Meter-2-600V™ (TS-M-2-600V) and the TriStar Remote Meter-2™ (TS-RM-2) are advanced digital meters. They are nearly identical except that the TS-M-2 and TS-M-2-600V are mounted on the controller and the TS-RM-2 is flush mounted up to 30 meters away from the controller. The TriStar meters are 2 x 16 character LCD’s that display system and controller information, logged data, bar graph metering, alarms and faults for easy troubleshooting. The information may be shown in English, French, German, Portuguese or Spanish.  In multicontroller systems, these are networkable using Morningstar’s MeterHub to allow individual controller data and aggregate system data to be displayed together on a single meter.

     


    Add to cart
  • TS__07334.1449615418.1280.1280

    Morningstar Tristar TS-45A /48V PWM Charge Controller

    0 out of 5
    50,000.00

    Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW.

    Warranty: 2 years

    Model Numbers: TS-MPPT-60, TS-MPPT-45, TS-MPPT-30

    Key Features and Benefits

    Maximizes Energy Harvest
    Extremely High Reliability
    Very High Efficiency
    Extensive Networking and Communication Capabilities
    Metering and Data Logging
    Certified to IEC 62093


    Add to cart
  • TS__07334.1449615418.1280.1280

    Morningstar TS-60 TriStar 60 Amp 12/24/48 Volt PWM Charge Controller

    0 out of 5
    65,000.00

    Morningstar’s TriStar™ is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. It is rated at 45 or 60 amps, both at 12-48 volts, and has an optional meter, remote meter and remote temperature sensor.

    Warranty : 1 Years

    Model Numbers: TS-45, TS-60

    Accessories: TS-M-2, TS-RM-2

    Key Features and Benefits

    Highest Reliability
    More Power
    Communications Capability
    Fully Adjustable
    Extensive Electronic Protections
    Programmable Lighting Control
    Simple Mechanical Interface
    Better Battery Charging
    More Information
    Easy to Reset
    Low Telecom Noise


    Add to cart
  • TS_RM_2_Straight_alone_F_retouch__84595.1449616500.500.500 (1)

    MORNINGSTAR TS-RM-2 TRISTAR REMOTE DIGITAL METER FOR TRISTAR TS-45 AND TS-60 CHARGE CONTROLLERS

    0 out of 5
    60,000.00

    The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meter enables manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance. It is worth the time getting to know your meter!

    The TriStar Meter-2™ (TS-M-2), TriStar Meter-2-600V™ (TS-M-2-600V) and the TriStar Remote Meter-2™ (TS-RM-2) are advanced digital meters. They are nearly identical except that the TS-M-2 and TS-M-2-600V are mounted on the controller and the TS-RM-2 is flush mounted up to 30 meters away from the controller. The TriStar meters are 2 x 16 character LCD’s that display system and controller information, logged data, bar graph metering, alarms and faults for easy troubleshooting. The information may be shown in English, French, German, Portuguese or Spanish.  In multicontroller systems, these are networkable using Morningstar’s MeterHub to allow individual controller data and aggregate system data to be displayed together on a single meter.

     


    Add to cart
  • PWM-font-b-Solar-b-font-font-b-Charge-b-font-font-b-Controller-b-font

    PWM 20A 12/24v Solar Charge Controller with USB LCD Fully 4-Stage PWM Charge

    0 out of 5
    6,500.00

    SAFETY INSTRUCTIONS   

    1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.

    2.The battery cable should be as short as possible to minimize loss.

    3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL

    it is not suited for nickel metal hydride, lithium ions or other batteries.

    4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

    PRODUCT FEATURES 

    1.Build-in industrial micro controller.

    2.Big LCD display,with 5V USB charger

    3. PWM charge management.

    4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.

    5.Dual mosfet Reverse current protection ,low heat production.

    SYSTEM CONNECTION  

    1.Connect the battery to the charge regulator – plus and minus.

    2.Connect the photovoltaic module to the regulator – plus and minus.

    3. Connect the consumer to the charge regulator – plus and minus.

    The reverse order applies when deinstalling!

    An improper sequence order can damage the controller!.

    TECHNICAL PARAMETER

     

    MODEL RTD1210 RTD1220 RTD1230 RTD4810 RLD4820
    Batt voltage 12V/24V auto 48V
    Charge current 10A 20A 30A 10A 20A
    Discharge current 10A 20A 30A 10A 20A
    Max Solar input <50V <80V
    Bulk charge 14.5V
    Float charge 13.7V
    Discharge stop 10.7V
    Discharge reconnect 12.6V
    USB output 5V/0.8A
    Self-consume <10mA
    Control mode PWM
    Operating temperature -35~+60 °C
    Size/Weight 150*78*35mm /150g

                   *all red color voltage X2 ,X4 while using 24V /48V system.


    Add to cart
  • Waterproof-solar-controller-IP68-built-in-LED-driver-with-time-and-light-control-function-pwm-solar

    WATERPROOF regulator 10Amps12/24V solar charge controller for street light

    0 out of 5
    8,000.00

    Application: it can charge the battery from solar panel, since it is water proof, it can be used outdoor, or used as solar street light controller.

     

    FUNCTION:

    1. Using the Epoxy resin sealed technology, increased the function like: fall-proof, earthquake-proof, waterproof, corrosion-proof, moisture-proof, and so on. Waterproof grade: IP68.
    2. System voltage : 12V/24V automatic switch
    3. Comprehensive reverse connection protection
    4. Intelligently overload, short circuit and over voltage protection. (After over current protection, it will restart for every 2 mins, until releasing the failure)
    5. Multi-working model choosing, multi-parameter adjusting, make the products more intelligently, more useful.
    6. It has temperature sensor outside, can make the temperature compensation more precise. 7. More advanced charging and discharging control algorithm, effectively increase the use of solar panels’ rate and battery life.
    7. Design of high power density, all-aluminum case. Smaller sizes and better performance 9.Controller with infrared wireless receiving and sending function; matching the remote control can be achieved on the wireless programming to the controller.
    8. Remote control can only be used to change the controller model, set the light time at night and control the loads’ switch, these the simple functionality If we use IRF remote control with LCD screen to complete more function setting for the controller (OPTIONAL

    Add to cart
  • 1KW24V48VLithiumorLeadAcidBatterySolarChargeController2

    Yohako 80Ah 120V PWM Charge Controller With LCD Display

    0 out of 5
    142,500.00
    • Superior military-grade components to ensure product stability.
    • Perfect protection function for higher reliability of the system.
    • Can check and set all operation parameters as required from LCD display.
    • PWM stepless unload mode, which burns the excess power into dump load which makes the battery charge better.
    • LCD Display Mode
    • Fan Cooled
    • IP20 Protection Level (Indoor)
    • ≤20 mA
    • Protection Functions: Battery over charge, Battery anti-reverse-connection, Solar reverse charge protection, Solar anti-reverse-connection, and lightning protection.
    • Ambient Temperature: -4~131F (-20~+55℃)
    • Ambient Humidity: 0~93%, without condensing
    • Working Altitude: ≤4000m

    Note: Parameters can be configured according to your individual requirements.


    Add to cart

Showing 13–24 of 24 results