• 30amps 12/24V PWM Solar Charge Controller With display

    • 30A SOLAR CHARGE CONTROLLER: Rated Discharge Current: 20A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge. Please notice the controller might be power off if the battery voltage is too low
    • ☀☀☀SOLAR CONTROLLER FUNCTIONALITY: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
    • ☀☀☀EASY TO USE: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc
    • ☀☀☀GOOD HEAT DISSIPATION: Dual reverse current protection, low heat production. ALL electronic components generate heat when they are running, it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place
    • ☀☀☀ WARRANTY SERVICER: Your satisfaction is our priority. We provide a 12-month warranty and professional customer service.If there is any question about the solar controller,please contact us whenever you want.
    6,500.00
  • 30amps 12/24V PWM Solar Charge Controller With Display

    Specifications:Solar controller has specifically designed to meet the needs of the rural electrification market.
    Working Temperature: -20C to +55C
    Self consume: Less Than 12mA
    Charge Type: PWM
    Waterproof Level: IP32
    Terminal Scale: 28-10 AWG
    Size:16.7 x 9 x 4cm/ 6.6x 3.5x 1.6inch(L*W*T)
    LCD display
    PWM battery charging
    All necessary protections equipped
    Adjustable controlling parameter of the system
    Suitable for Home, Industrial, Commercial etc.

    Note:
    1. The function of the controller is to protect the voltage overshoot and discharge.
    2. When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output.
    3. 12.6 v is to restore the discharge voltage.
    4. When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection.
    5. The controller normal voltage of 10.7 v to 13.7v. This two voltage fluctuation, you can be set manually

    If you got trouble in using please try to adjust the Float Voltage to 13.7V:
    Firstly, you need to long press the MCU control button about 3-4 s, and then there will be a management interface on the screen.
    Secondly, you have to press the Add button under the screen until the voltage reaches 13.7 volts.
    Lastly, you need to re-press the MCU control button again, when the display doesn it blink anymore it saves controller recording the data.

    Package Includes:
    1 x Solar Charge Controller
    1 x User Manual

    7,500.00
  • 50amps 12/24V PWM Solar Charge Controller With Display

    Features:
    100% brand new and high quality
    Protections:
    Over-charging for protection
    Over-discharge for Protection
    Over-load for protection
    Under-voltage for protection
    Short-circuit for protection
    Reverse-polarity for protection
    Specifications:
    Rated Voltage: 12V/24V Automatic voltage recognition
    Max. Charge Current: 50A
    Max. Discharge Current: 50A
    Full Charge Cut: 16.5V/33V
    Low Voltage Cut: 11/22V
    Low Voltage Restore: 12.6V/25.2V
    Temp compensation:-3mv/°C/cell
    Static Current: ≤45mA
    Voltage Drop: <240mv
    Wire area max. : 6mm⊃2;
    Size: 192*106*40mm
    Color: Black&Green
    15,000.00
  • 50amps 12/24V PWM Solar Charge Controller With Display

    Solar Charge Controller 50A, Solar Panel Controller 12V/24V 1440W PWM Auto Paremeter Adjustable LCD Display Solar Panel Battery Regulator with Dual USB Mobile Charger Output Enhanced Heat Sink(50A)

    15,000.00
  • 60Amps 12/24/48V PWM Solar Charge Controller With Display

    50A smart PWM solar charge controller for 12V/24V/48V batteries, with dual USB port, auto swich DC 12V/24V.48V, light weight, beautiful appearance and fast heat dissipation.

    Specification:

    Model ATO-PWM-60
    System Voltage DC 12V/24V, DC 24V/48V,automatically switch
    The Max Voltage of The Solar Panel Input 60V (12V/24V), 100V (24V/48V)
    Self Los ≤13mA
    Max Charge Current 20A
    Max Discharge Current 20A
    LVD (9-11V), 21V (18-22V), 42V (36-44V)
    LVR 12.6V (11-13.5V), 25.2V (22-27V), 50.4V (44-54V)
    Floating Voltage 13.8V (13-15V), 27.6V(26-30V), 55.2V(52-60V)
    Increase the Charge 14.4V/28.8V/57.6V, the battery voltage is below 12V/24V/48V, start extra charge for 2 hours
    Batterry overpressure protection 15V/30V/60V
    Input Reverse Connection Protection Yes
    Load Over Current Protection Yes, every two seconds to restart
    Charging Mode PWM
    Temperature Compensation -24mV℃, -48mV℃, -96-mV℃, relative to 12V/24V/48V System
    Operating Temperation -20℃- +55℃
    Terminal Scale 28-10AWG
    Waterproof level IP 32
    Product Size 195mm*107mm*59mm
    Weight 850g

     60A 12V/24V/48V PWM Solar Charge Controller Features

    • Automatic identification system voltage 12V/24V or 24V/48V.
    • Personalized LCD display and two-button operator and page.
    • High performance PWM three-stage charging.
    • You can choose to load the control template and set the streetlights in the world at night.
    • With overvoltage, short circuit, overload, overcharge, over discharge protection.
    • Accurate temperature compensation, correct charging and discharging voltages automatically extend battery life.
    • The default setting can be reset when the controller with the parameter set is powered off.
    • The positive and negative terminals of the input terminal are reversely connected to protect.
    26,000.00
  • 60amps 12/24V PWM Solar Charge Controller With Display

    Description:

    This is an intelligent solar charge and discharge controller. Fixed LCD display with a very friendly interface, various control parameters can be flexibly set, fully meet your home Photovoltaic system (including home lighting system) requirements. Widely used for solar green light, solar light billboards, solar insecticidal lights, solar power generation systems, ship solar power systems, solar power generation systems, and more.

     

    Features:

    1. Stable Performance: Built-in industrial micro controller, which can operate steadily in cold, high temperature and humid environment.
    2. 12V/ 24V Voltage Auto Identification, so intelligent and provides your life more convenience.
    3. LCD Display Large Screen: ensures convenient and intuitive operations.
    4. Dual USB output: Easy connect to mobile phones, allows fast and powerful charging for mobile phones.
    5. Fully 3-stage PWM charge management: Equalizing charge to the battery periodically, can effectively prevent the battery from non-equalization and sulfuration, and prolong the battery’s service life
    6. Full Protection: Provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
    7. Wide range of load working: facilitate the product’s application to different types of street lights and monitoring devices.
    8. Wide Application: Applicable for solar green light, solar light billboards, solar insecticidal lights, solar power generation systems, ship solar power systems, solar power generation systems, etc.
    20,000.00
  • Epever 30Amps 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    35,000.00
  • Epever 40Amps 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    48,000.00
  • Epever 50Amps 12/24/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    53,000.00
  • Epever 60A 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24V/48DCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    60,000.00

Shop By Department