• Epever 40Amps 12/24V MPPT Solar Charge Controller with Display

    EPEVER TRIRON “N” SERIES MODULAR MPPT SOLAR CHARGE CONTROLLER 40A 150V MAX PV INPUT 12V/24V BATTERY CHARGER

    The TRIRON series MPPT Solar Controllers are modular-designed products based on nine MPPT solar charge controller models.

    The main unit (Power Module) is a mppt charge controller which can be integrated with different display and interface modules to meet a variety of functional requirements.

    Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.

    Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile, TRIRON mppt charge controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the actual working value would not be higher than rated value).

    The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION mppt controller can be widely used in RV, telecommunication base station, household system, field monitoring.

    Technial Data:

    Model: Triron 4215N UCS/DS2

    Nominal System Voltage: 12V/24V Battery System

    Rated Charge Current: 40A

    Rated Discharge Current: 40A

    Battery Voltage Range: 8-32V

    Max PV Open Circuit Voltage: 150V at Min. operating environment temp.;138V at 25℃environment temp.

    Max PV Input Power: 520W(12v battery), 1040W (24v battery)

    Battery Type Supported: Sealed / Gel / Flooded;LiFePO4 / Li-NiCoMn / User , Lithium battery(LiFePO4 /Li-NiCoMn/User)

    Note:

    • Controller can not auto recognize system voltage when battery type is “lithium battery“, please confirm the system voltage before use.
    • There will be no Equalize Charge when the battery type is “lithium battery”
    58,000.00
  • Epever 50Amps 12/24/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    53,000.00
  • Epever 60A 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24V/48DCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    60,000.00
  • Epever 60Amps 12/24V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    58,000.00
  • Epever Epsolar eTracer 45A 12/24/36/48V MPPT Solar Charge Controller

    Baby Sizes Free Size
    Brand Epever

    Features?
    ?·Advanced MPPT technology, with efficiency no less than 99.5%.
    ?·Maximum conversion efficiency of 98% and full load efficiency of 97%.
    ?·MSRT, realizing high conversion efficiency in the situation of low charge power.
    ?·Ultra-fast tracking speed and guaranteed tracking efficiency.
    ·Accurately recognizing and tracking of multiple power points.
    ·Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.
    ·Wide MPP operating voltage range.
    ·High-speed and high-powered dual-core processor architecture, improving system response speed, optimizing system performance.
    ·Die-cast aluminum case for heat dissipating, ensuring excellent heat dissipation characteristic.
    ·12/24/36/48VDC automatically identifying system voltage or user-defined working voltage.
    ·Concise human-computer interactive interface, convenient multiple combination keys, dynamically displaying system operating data and working condition.
    ·Support 4 charging options: Sealed, Gel, Flooded and User.
    ·Battery temperature compensation function.
    ·Real-time energy statistics function.
    ·With RS-485, RS-232 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
    ·Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.
    ·Support software upgrade

    Electronic Protections:
    ·PV short circuit protection
    ·PV over current protection
    ·PV reverse polarity protection
    ·Battery over voltage protection
    ·Battery over discharge protection
    ·Battery reverse polarity protection
    ·Battery overheating protection
    ·Controller overheating protection

     

    98,000.00
  • Epever eTracer 60Amps 12/24/36/48V MPPT Solar Charge Controller

    • Advanced MPPT technology, with efficiency no less than 99.5%.
    • Maximum conversion efficiency of 98% and full load efficiency of 97%.
    • MSRT, realizing high conversion efficiency in the situation of low charge power.
    • Ultra-fast tracking speed and guaranteed tracking efficiency.
    • Accurately recognizing and tracking of multiple power points.
    • Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.
    • Wide MPP operating voltage range.
    • High-speed and high-powered dual-core processor architecture, improving system response speed, optimizing system performance.
    • Die-cast aluminum case for heat dissipating, ensuring excellent heat dissipation characteristic.
    • 12/24/36/48VDC automatically identifying system voltage or user-defined working voltage.
    • Concise human-computer interactive interface, convenient multiple combination keys, dynamically displaying system operating data and working condition.
    • Support 4 charging options: Sealed, Gel, Flooded and User.
    • Battery temperature compensation function.
    • Real-time energy statistics function.
    • With RS-485, RS-232 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
    • Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.
    • Support software upgrade
    125,000.00
  • Fangpusun 30Amps 12/24V MPPT Solar Charge Controller

    Untra-fast

    Maximum Power Point Tracking(MPPT)

    Especially in case of a clouded sky, when light intensity is changing continuously, an

    ultra fast MPPT controller will improve energy harvest by up to

    30%

    compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers

     

     

    Advanced Maximum Power Point Detection

    in case of partial shading conditions

    If partial shading occurs, two or more maximum power points may be present on

    the power-voltage curve. Conventional MPPT’s tend to lock toalocal MPP, which may

    not be the optimum MPP. The innovative fangpusun algorithm will always maximize

    energy harvest by locking to the optimum MPP

     

    Outstanding conversion efficiency

     

    No cooling fan maximum efficiency exceeds 98%

     

    Flexible charge algorithm

    Fully programmable charge algorithm(see the software page on our website), and eight

    preprogrammed algorithms, selectable with a rotagy switch(see manual for details)

     

     

    Extensive electronic protection

    ■Over-temperature protection and power derating when temperature is high.

    ■PV short circuit and PV reverse polarity protection.

    ■PV reverse current protection.

     

    Internal temperature sensor

    Compensates absorption and float charge voltage for temperature

     

    Display                                                           Operation

     

    Graphical LCD display                                   Simple menu-driven operation

    Programming by buttons

     

     

    Certificates

     

    ■Compliant with European Standards(CE)

    ■ROHS compliant

    ■SGS

    ■ISo9001

    ■Made in China

     

    Maximum Power Point Tracking

     

    Upper curve:

    Output current o of a solar panel as function of output voltage(V)

     

    The maximum power point(MPP)is the point

    Pmax along the curve where the product x V reaches its peak

     

    Lower curve:

    Output power P=l as function of output voltage.

     

    When using a PWM(not MPPT) controller the output voltage of the solar panel will be

    nearly equal to the voltage of the battery, and will belower than Vmp.

     

    Solar Charge Controller MPPT 150/45D MPPT 150/60D MPPT 150/70D
    Battery voltage 12/24/48 V Auto Select (Only Factory setting 36V)
    Rated charge current 45A 60A 70A
    Maximum PV power, 12V 1a, b) 650W 860W 1000W
    Maximum PV power, 24V 1a, b) 1300W 1720W 2000W
    Maximum PV power, 48V 1a, b) 2600W 3440W 4000W
    Maximum PV open circuit voltage 150V absolute maximum coldest conditions, 145V start-up and operating maximum
    Maximum efficiency 98%
    Self-consumption 20 mA
    Charge voltage ‘absorption’ Default setting: 14, 4/ 28, 8/43, 2/57, 6 V(adjustable)
    Charge voltage ‘float’ Default setting: 13,8/ 27,6/41 ,4/55,2 V(adjustable)
    Charge algorithm multi-stage adaptive
    Temperature compensation -16mV/° C resp.-32mV/°C
    Protection Battery reverse polarity(fuse, not user accessible)

    PV reverse polarity /Output short circuit /Over temperature

    Operating temperature -30 to +60℃ (full r ated output up to 40℃)
    Humidity 95%, non-condensing
    Parallel operation Yes(not synchronized)
    ENCLOSURE
    PV terminals 2) 35 mm²/ AWG2 (Tr models)
    Battery terminals 35 mm²/AWG2
    Protection category IP43 (electronic components ),IP22 (connection area)
    weight 3kg
    Dimensions (h x w x Z) Tr models:248×178×103mm
    STANDARDS
    safety EC62109-1-2010

     

    1a) If more PV power is connected,the controller will limit input power to the stated maximum.

    1b) PV voltage must exceed  Vbat +5V for the controller to start. Thereafter minimum PV voltage is Vbat +1V.

    40,000.00
  • Fangpusun 60amps 12/24/36/48V MPPT Solar Charge Controller

    The 60A 12/24V MPPT Controller from Fangpusun it uses the latest Continuous Maximum Power Point Tracking (MPPT) technology, which seeks out the maximum power available from a solar array.  Voltage stepdown converter to be able to convert high PV voltages down to lower battery voltages of 12 and 24 volts.  Connect a maximum of: 750 watts(@12V) , 1500 watts(@24V)  to your batteries.
    IP43 rated, with no cooling fan and resin encapsulated electronics: Protects the electronic components against dirty and wet environments.
    Advanced Maximum Power Point Detection MPPT rapidly adjusts to changing weather conditions giving you 10% more power comparerd to slower MPPT Controllers. And in case of partial shading conditions two or more maximum power points may be present on the power-voltage curve and the greater of these will be found. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. Maximum efficiency exceeds 98%.
    Battery Charging
    Charge voltage ‘absorption’ Default setting: 14,4V / 28,8V (adjustable)
    Charge voltage ‘float’ Default setting: 13,8V / 27,6V (adjustable
    Adjustable Battery Chargging Algorithim:  Eight pre-programmed battery charge algorithms, selectable with a rotary switch.  Seven Lead-acid battery settings and setting for Lithium Iron Phosphate Batteries(Li FePO4).
    All charging voltages are also individual adjustable in 0.1V increments using the remote monitor
    Compensates absorption and float charge voltage for temperature
    Protections
    Over-temperature protection and automatic power derating when temperature is high.
    Battery reverse polarity
    PV short circuit and PV reverse polarity protection.
    PV reverse current protection.
    Maximum Open Circuit Voltage of Solar Module Range 100V
    Maximum Output Current 50A
    Standby power consumption:  less than 10mA
    Temperature compensation -16 mV / °C resp. -32 mV / °C
    Terminal Size  fit up to 16mm2 cable  AWG5
    Operating temperature: minimum -30C maximum 60C
    Dimensions (h x w x d) 130 x 186 x 70 mm
    Weight 1.3kg
    105,000.00
  • Fangpusun Flexmax 60Amps 12/24/36/48/60V MPPT Solar Charge Controller

    fangpusun FLEXmax MPPT

     MPPT60
    The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from fangpusun.The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).

     

    Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by fangpusun, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.

    FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

    Product features
    Increases PV Array Output by up to 30%
    Advanced Continuous Maximum Power Point Tracking
    Full Power Output in Ambient Temperatures up to 104°F (40°C)
    Battery Voltages from 12 VDC to 60 VDC
    Programmable Auxiliary Control Output
    Built-in 128 days of Data Logging
    Fully Network Integrated and Programmable

    Displays
    Text LCD display for operating parameters,fault messages,self test

    Options
    Menu-driven operation
    Programming by buttons

    Certificates
    Compliant with European Standards(CE)

    RoHS compliant
    Made in China

    Specifications

    FLEXmax MPPT60 FLEXmax MPPT80
    Nominal Battery Voltages 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up)
    Maximum Output Current 60 amps @ 104° F (40°C) with adjustable current limit 80 amps @ 104° F (40°C) with adjustable current limit
    Maximum Solar Array STC Nameplate 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts /
    48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts 48 VDC systems 5000 Watts / 60 VDC Systems 7500 Watts
    NEC Recommended Solar Anay STC Nameplate 12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts /
    48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts
    PV Open Circuit Voltage (VOC) 150 VDC absolute maximum coldest conditions /145 VDC start-up
    and operating maximum
    Standby Power Consumption Less than 1 Watt typical
    Power Conversion Efficiency 98.1% @ 60 Amps in at 48 VDC System voltage – Typical 97.5% @ 60 Amps in at 48 VDC System voltage – Typical
    Charging Regulation Five Stages: Bulk, Absorption, Float, Silent and Equalization
    Voltage Regulation Set points 10 to 80 VDC user adjustable with password protection
    Equalization Charging Programmable Voltage Setpoint and Duration – Automatic Termination when completed
    Battery Temperature Compensation Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
    Voltage Step-Down Capability Can charge a lower voltage battery from a higher voltage PV array
    – Max 150 VDC input
    Programmable Auxilary Control Output 12 VDC output signal which can be programmed for different control
    applications (Maximum of 0.2 amps DC)
    Status Display 3.1″ (8 cm) backlit LCD screen – 4 lines with 80 alphanumeric characters total
    Remote Display and Controller Optional Mate or Mate2 with RS232 Serial Communications Port
    Network Cabeling Proprietary network system using RJ 45 Modular Connectors with
    CAT 5e Cable (8 wires)
    Data Logging Last 128 days of Operation – Amp Hours, Watt Hours, Time in Float,
    Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min
    Battery Voltage and Absorb for each day along with total Accumulated
    Amp Hours, and kW Hours of production
    Hydro Turbine Applications Consult factory for approved Turbines
    Positive Ground Applications Requires two Pole Breakers for switching both positive and Negative
    Conductors on both Solar Array and Battery Connections (HUB-4 and
    HUB-10 can not be used for use in positive ground applications)
    Operating Temperature Range Minimum -40° to maximum 60° C (Power capacity of the controller is
    automatically derated when operated above 40° C)
    Environmental Rating Indoor Type 1
    Conduit Knockouts One 1″ (35mm)on the back; One 1″ (35mm) on the left side;
    Two 1″ (35mm) on the bottom
    Weight – Unit 5.3 kg 5.6 kg
    – Shipping 6kg 7.02 kg
    Dimensions – Unit 40 x 14 x 10 cm 44 x 14 x 10 cm
    – Shipping 46 x 30 x 20 cm 51 x 24 x 21.5 cm
    Options Remote Temperature Sensor (RTS), HUB 4,HUB 10, MATE, MATE 2
    Menu Languages English & Spanish
    135,000.00
  • -6%

    Felicity 60amps Mppt Solar Charge Controller

    New brand 2019 mppt solar charge controller circuit diagram at the wholesale price

    A MPPT( Maximum Power Point Tracking ), or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels (and a few wind generators) down to the lower voltage needed to charge batteries. Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed.

    Features

    ·Advanced maximum power point tracking technology to optimize using the solar system.

    ·Excellent thermal design and nature air cooling.

    ·Peak conversion efficiency of 98%, several seconds tracking speed.

    ·Adopting temperature compensation , improving the battery lifetime.

    ·Electronic Protection: over charging, over discharging, overload, short circuit.

    ·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component.

    80,000.0085,000.00 6% off

    Felicity 60amps Mppt Solar Charge Controller

    80,000.0085,000.00 6% off
  • -4%

    Felicity 80amps Mppt Solar Charge Controller

    Products Feature:

    1. Intelligent Maximum Power Point Tracking technology

    increases efficiency 25%~30%

    2. Compatible for PV systems in 12V, 24V or 48V

    3. Three-stage charging optimizes battery performance

    4. Maximum charging current up to 60A

    5. Maximum efficiency up to 98%

    6. Battery temperature sensor (BTS) automatically provides

    temperature compensation

    7. Automatic battery voltage detection

    8. Support wide range of lead-acid batteries including wet,

    AGM and gel batteries

    9. Integrated intelligent slot compatible with SNMP/MODBUS communication

    Model SCCM4548 SCCM6048 SCCM8048 SCCM10048 SCCM12048
    Maximum Solar input Voltage 145V 190V
    Nominal System Voltage 12,24,48VDC(Auto detection)
    Maximum Battery Current 45A 45A 45A 45A 45A
    DC Array MPPT Volage Range 12VDC/24VDC/48VDC
    PV Array MPPT Volage Range 15-115VDC/30-115VDC-60-115VDC 15-190VDC/30-190VDC-60-190VDC
    Maxinmum input Power

    12Volt-625Watts

    12Volt-825Watts 12Volt-1100Watts 12Volt-1375Watts 12Volt-1650Watts
    24Volt-1250Watts 24Volt-1650Watts 24Volt-2200Watts 24Volt-2750Watts 24Volt-3300Watts
    48Volt-2500Watts 48Volt-3300Watts 48Volt-4400Watts 48Volt-5500Watts 48Volt-6600Watts
    Charging information  
    Charging Curve
    Charging Algorithm 3-Step
    Charging stages Bulk,Absorption,Float Bulk,Absorption,Float
    Temperature compensation coefficient -5mV/℃/cell(25℃ref.) -5mV/℃/cell(25℃ref.)
    Temperature compensation range 0℃ to +50℃ 0℃ to +50℃
    Temperature compensated set points Absorption,Float Absorption,Float
    Charging Set points Absorption Stage Absorption Stage Float Stage
    Flooded Battery 14.6V/29.2V/58.4V 14.6V/29.2V/58.4V 13.5V/27V/54V
    ARG/Gel Battery(Default) 14.1V/28.2V/56.4V 14.1V/28.2V/56.4V 13.5V/27V/54V
    Overcharge voltage 15V/30V/60V 15V/30V/60V
    Overcharge restart voltage 14.5V/29V/58V 14.5V/29V/58V
    Battery discharge voltage 8.5V/17V/34V 8.5V/17V/34V
    Battery overdischarge voltage 9V/18V/36V 9V/18V/36V
    Mechanical & Environment  
    Product size(H*W*D,mm) 283*160*105 mm 283*180*105mm 333*215*105mm

    Product weight(Kg)

     

    4.0kg 5.1kg 5.1kg
    Ambient Temperature Range 0℃ to +55℃

    Storage Temperature

     

    -40℃ to 75℃
    Humidity 0%-90%RH(No condensing)
    Enclosure IP31(indoor&vented)

    Details:

    115,000.00120,000.00 4% off

    Felicity 80amps Mppt Solar Charge Controller

    115,000.00120,000.00 4% off

Shop By Department