• Epever 30Amps 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    35,000.00
  • Epever 30Amps 12/24V MPPT Solar Charge Controller With Display

    EPEVER TRIRON “N” SERIES MODULAR MPPT SOLAR CHARGE CONTROLLER 30A 150V MAX PV INPUT 12V/24V BATTERY CHARGER

    The TRIRON series MPPT Solar Controllers are modular-designed products based on nine MPPT solar charge controller models.

    The main unit (Power Module) is a mppt charge controller which can be integrated with different display and interface modules to meet a variety of functional requirements.

    Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.

    Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile, TRIRON mppt charge controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the actual working value would not be higher than rated value).

    The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION mppt controller can be widely used in RV, telecommunication base station, household system, field monitoring.

    Technial Data:

    Model: Triron 4215N UCS/DS2

    Nominal System Voltage: 12V/24V Battery System

    Rated Charge Current: 30A

    Rated Discharge Current: 30A

    Battery Voltage Range: 8-32V

    Max PV Open Circuit Voltage: 150V at Min. operating environment temp.;138V at 25℃environment temp.

    Max PV Input Power: 520W(12v battery), 1040W (24v battery)

    Battery Type Supported: Sealed / Gel / Flooded;LiFePO4 / Li-NiCoMn / User , Lithium battery(LiFePO4 /Li-NiCoMn/User)

    Note:

    • Controller can not auto recognize system voltage when battery type is “lithium battery“, please confirm the system voltage before use.
    • There will be no Equalize Charge when the battery type is “lithium battery”
    47,000.00
  • Epever 40Amps 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    48,000.00
  • Epever 40Amps 12/24V MPPT Solar Charge Controller with Display

    EPEVER TRIRON “N” SERIES MODULAR MPPT SOLAR CHARGE CONTROLLER 40A 150V MAX PV INPUT 12V/24V BATTERY CHARGER

    The TRIRON series MPPT Solar Controllers are modular-designed products based on nine MPPT solar charge controller models.

    The main unit (Power Module) is a mppt charge controller which can be integrated with different display and interface modules to meet a variety of functional requirements.

    Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.

    Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile, TRIRON mppt charge controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the actual working value would not be higher than rated value).

    The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION mppt controller can be widely used in RV, telecommunication base station, household system, field monitoring.

    Technial Data:

    Model: Triron 4215N UCS/DS2

    Nominal System Voltage: 12V/24V Battery System

    Rated Charge Current: 40A

    Rated Discharge Current: 40A

    Battery Voltage Range: 8-32V

    Max PV Open Circuit Voltage: 150V at Min. operating environment temp.;138V at 25℃environment temp.

    Max PV Input Power: 520W(12v battery), 1040W (24v battery)

    Battery Type Supported: Sealed / Gel / Flooded;LiFePO4 / Li-NiCoMn / User , Lithium battery(LiFePO4 /Li-NiCoMn/User)

    Note:

    • Controller can not auto recognize system voltage when battery type is “lithium battery“, please confirm the system voltage before use.
    • There will be no Equalize Charge when the battery type is “lithium battery”
    58,000.00
  • Epever 50Amps 12/24/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    53,000.00
  • Epever 60A 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24V/48DCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    60,000.00
  • Epever 60Amps 12/24V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    58,000.00
  • Epever Epsolar eTracer 45A 12/24/36/48V MPPT Solar Charge Controller

    Baby Sizes Free Size
    Brand Epever

    Features?
    ?·Advanced MPPT technology, with efficiency no less than 99.5%.
    ?·Maximum conversion efficiency of 98% and full load efficiency of 97%.
    ?·MSRT, realizing high conversion efficiency in the situation of low charge power.
    ?·Ultra-fast tracking speed and guaranteed tracking efficiency.
    ·Accurately recognizing and tracking of multiple power points.
    ·Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.
    ·Wide MPP operating voltage range.
    ·High-speed and high-powered dual-core processor architecture, improving system response speed, optimizing system performance.
    ·Die-cast aluminum case for heat dissipating, ensuring excellent heat dissipation characteristic.
    ·12/24/36/48VDC automatically identifying system voltage or user-defined working voltage.
    ·Concise human-computer interactive interface, convenient multiple combination keys, dynamically displaying system operating data and working condition.
    ·Support 4 charging options: Sealed, Gel, Flooded and User.
    ·Battery temperature compensation function.
    ·Real-time energy statistics function.
    ·With RS-485, RS-232 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
    ·Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.
    ·Support software upgrade

    Electronic Protections:
    ·PV short circuit protection
    ·PV over current protection
    ·PV reverse polarity protection
    ·Battery over voltage protection
    ·Battery over discharge protection
    ·Battery reverse polarity protection
    ·Battery overheating protection
    ·Controller overheating protection

     

    98,000.00
  • Epever eTracer 60Amps 12/24/36/48V MPPT Solar Charge Controller

    • Advanced MPPT technology, with efficiency no less than 99.5%.
    • Maximum conversion efficiency of 98% and full load efficiency of 97%.
    • MSRT, realizing high conversion efficiency in the situation of low charge power.
    • Ultra-fast tracking speed and guaranteed tracking efficiency.
    • Accurately recognizing and tracking of multiple power points.
    • Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.
    • Wide MPP operating voltage range.
    • High-speed and high-powered dual-core processor architecture, improving system response speed, optimizing system performance.
    • Die-cast aluminum case for heat dissipating, ensuring excellent heat dissipation characteristic.
    • 12/24/36/48VDC automatically identifying system voltage or user-defined working voltage.
    • Concise human-computer interactive interface, convenient multiple combination keys, dynamically displaying system operating data and working condition.
    • Support 4 charging options: Sealed, Gel, Flooded and User.
    • Battery temperature compensation function.
    • Real-time energy statistics function.
    • With RS-485, RS-232 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
    • Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.
    • Support software upgrade
    125,000.00

Shop By Department