• 30amps 12/24V PWM Solar Charge Controller With display

    • 30A SOLAR CHARGE CONTROLLER: Rated Discharge Current: 20A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge. Please notice the controller might be power off if the battery voltage is too low
    • ☀☀☀SOLAR CONTROLLER FUNCTIONALITY: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
    • ☀☀☀EASY TO USE: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc
    • ☀☀☀GOOD HEAT DISSIPATION: Dual reverse current protection, low heat production. ALL electronic components generate heat when they are running, it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place
    • ☀☀☀ WARRANTY SERVICER: Your satisfaction is our priority. We provide a 12-month warranty and professional customer service.If there is any question about the solar controller,please contact us whenever you want.
    6,500.00
  • 30amps 12/24V PWM Solar Charge Controller With Display

    Specifications:Solar controller has specifically designed to meet the needs of the rural electrification market.
    Working Temperature: -20C to +55C
    Self consume: Less Than 12mA
    Charge Type: PWM
    Waterproof Level: IP32
    Terminal Scale: 28-10 AWG
    Size:16.7 x 9 x 4cm/ 6.6x 3.5x 1.6inch(L*W*T)
    LCD display
    PWM battery charging
    All necessary protections equipped
    Adjustable controlling parameter of the system
    Suitable for Home, Industrial, Commercial etc.

    Note:
    1. The function of the controller is to protect the voltage overshoot and discharge.
    2. When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output.
    3. 12.6 v is to restore the discharge voltage.
    4. When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection.
    5. The controller normal voltage of 10.7 v to 13.7v. This two voltage fluctuation, you can be set manually

    If you got trouble in using please try to adjust the Float Voltage to 13.7V:
    Firstly, you need to long press the MCU control button about 3-4 s, and then there will be a management interface on the screen.
    Secondly, you have to press the Add button under the screen until the voltage reaches 13.7 volts.
    Lastly, you need to re-press the MCU control button again, when the display doesn it blink anymore it saves controller recording the data.

    Package Includes:
    1 x Solar Charge Controller
    1 x User Manual

    7,500.00
  • 50amps 12/24V PWM Solar Charge Controller With Display

    Features:
    100% brand new and high quality
    Protections:
    Over-charging for protection
    Over-discharge for Protection
    Over-load for protection
    Under-voltage for protection
    Short-circuit for protection
    Reverse-polarity for protection
    Specifications:
    Rated Voltage: 12V/24V Automatic voltage recognition
    Max. Charge Current: 50A
    Max. Discharge Current: 50A
    Full Charge Cut: 16.5V/33V
    Low Voltage Cut: 11/22V
    Low Voltage Restore: 12.6V/25.2V
    Temp compensation:-3mv/°C/cell
    Static Current: ≤45mA
    Voltage Drop: <240mv
    Wire area max. : 6mm⊃2;
    Size: 192*106*40mm
    Color: Black&Green
    15,000.00
  • 50amps 12/24V PWM Solar Charge Controller With Display

    Solar Charge Controller 50A, Solar Panel Controller 12V/24V 1440W PWM Auto Paremeter Adjustable LCD Display Solar Panel Battery Regulator with Dual USB Mobile Charger Output Enhanced Heat Sink(50A)

    15,000.00
  • 60amps 12/24V PWM Solar Charge Controller With Display

    Description:

    This is an intelligent solar charge and discharge controller. Fixed LCD display with a very friendly interface, various control parameters can be flexibly set, fully meet your home Photovoltaic system (including home lighting system) requirements. Widely used for solar green light, solar light billboards, solar insecticidal lights, solar power generation systems, ship solar power systems, solar power generation systems, and more.

     

    Features:

    1. Stable Performance: Built-in industrial micro controller, which can operate steadily in cold, high temperature and humid environment.
    2. 12V/ 24V Voltage Auto Identification, so intelligent and provides your life more convenience.
    3. LCD Display Large Screen: ensures convenient and intuitive operations.
    4. Dual USB output: Easy connect to mobile phones, allows fast and powerful charging for mobile phones.
    5. Fully 3-stage PWM charge management: Equalizing charge to the battery periodically, can effectively prevent the battery from non-equalization and sulfuration, and prolong the battery’s service life
    6. Full Protection: Provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
    7. Wide range of load working: facilitate the product’s application to different types of street lights and monitoring devices.
    8. Wide Application: Applicable for solar green light, solar light billboards, solar insecticidal lights, solar power generation systems, ship solar power systems, solar power generation systems, etc.
    20,000.00
  • 60Amps 12/24/48V PWM Solar Charge Controller With Display

    50A smart PWM solar charge controller for 12V/24V/48V batteries, with dual USB port, auto swich DC 12V/24V.48V, light weight, beautiful appearance and fast heat dissipation.

    Specification:

    Model ATO-PWM-60
    System Voltage DC 12V/24V, DC 24V/48V,automatically switch
    The Max Voltage of The Solar Panel Input 60V (12V/24V), 100V (24V/48V)
    Self Los ≤13mA
    Max Charge Current 20A
    Max Discharge Current 20A
    LVD (9-11V), 21V (18-22V), 42V (36-44V)
    LVR 12.6V (11-13.5V), 25.2V (22-27V), 50.4V (44-54V)
    Floating Voltage 13.8V (13-15V), 27.6V(26-30V), 55.2V(52-60V)
    Increase the Charge 14.4V/28.8V/57.6V, the battery voltage is below 12V/24V/48V, start extra charge for 2 hours
    Batterry overpressure protection 15V/30V/60V
    Input Reverse Connection Protection Yes
    Load Over Current Protection Yes, every two seconds to restart
    Charging Mode PWM
    Temperature Compensation -24mV℃, -48mV℃, -96-mV℃, relative to 12V/24V/48V System
    Operating Temperation -20℃- +55℃
    Terminal Scale 28-10AWG
    Waterproof level IP 32
    Product Size 195mm*107mm*59mm
    Weight 850g

     60A 12V/24V/48V PWM Solar Charge Controller Features

    • Automatic identification system voltage 12V/24V or 24V/48V.
    • Personalized LCD display and two-button operator and page.
    • High performance PWM three-stage charging.
    • You can choose to load the control template and set the streetlights in the world at night.
    • With overvoltage, short circuit, overload, overcharge, over discharge protection.
    • Accurate temperature compensation, correct charging and discharging voltages automatically extend battery life.
    • The default setting can be reset when the controller with the parameter set is powered off.
    • The positive and negative terminals of the input terminal are reversely connected to protect.
    26,000.00
  • Epever 30Amps 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    35,000.00
  • Fangpusun 30Amps 12/24V MPPT Solar Charge Controller

    Untra-fast

    Maximum Power Point Tracking(MPPT)

    Especially in case of a clouded sky, when light intensity is changing continuously, an

    ultra fast MPPT controller will improve energy harvest by up to

    30%

    compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers

     

     

    Advanced Maximum Power Point Detection

    in case of partial shading conditions

    If partial shading occurs, two or more maximum power points may be present on

    the power-voltage curve. Conventional MPPT’s tend to lock toalocal MPP, which may

    not be the optimum MPP. The innovative fangpusun algorithm will always maximize

    energy harvest by locking to the optimum MPP

     

    Outstanding conversion efficiency

     

    No cooling fan maximum efficiency exceeds 98%

     

    Flexible charge algorithm

    Fully programmable charge algorithm(see the software page on our website), and eight

    preprogrammed algorithms, selectable with a rotagy switch(see manual for details)

     

     

    Extensive electronic protection

    ■Over-temperature protection and power derating when temperature is high.

    ■PV short circuit and PV reverse polarity protection.

    ■PV reverse current protection.

     

    Internal temperature sensor

    Compensates absorption and float charge voltage for temperature

     

    Display                                                           Operation

     

    Graphical LCD display                                   Simple menu-driven operation

    Programming by buttons

     

     

    Certificates

     

    ■Compliant with European Standards(CE)

    ■ROHS compliant

    ■SGS

    ■ISo9001

    ■Made in China

     

    Maximum Power Point Tracking

     

    Upper curve:

    Output current o of a solar panel as function of output voltage(V)

     

    The maximum power point(MPP)is the point

    Pmax along the curve where the product x V reaches its peak

     

    Lower curve:

    Output power P=l as function of output voltage.

     

    When using a PWM(not MPPT) controller the output voltage of the solar panel will be

    nearly equal to the voltage of the battery, and will belower than Vmp.

     

    Solar Charge Controller MPPT 150/45D MPPT 150/60D MPPT 150/70D
    Battery voltage 12/24/48 V Auto Select (Only Factory setting 36V)
    Rated charge current 45A 60A 70A
    Maximum PV power, 12V 1a, b) 650W 860W 1000W
    Maximum PV power, 24V 1a, b) 1300W 1720W 2000W
    Maximum PV power, 48V 1a, b) 2600W 3440W 4000W
    Maximum PV open circuit voltage 150V absolute maximum coldest conditions, 145V start-up and operating maximum
    Maximum efficiency 98%
    Self-consumption 20 mA
    Charge voltage ‘absorption’ Default setting: 14, 4/ 28, 8/43, 2/57, 6 V(adjustable)
    Charge voltage ‘float’ Default setting: 13,8/ 27,6/41 ,4/55,2 V(adjustable)
    Charge algorithm multi-stage adaptive
    Temperature compensation -16mV/° C resp.-32mV/°C
    Protection Battery reverse polarity(fuse, not user accessible)

    PV reverse polarity /Output short circuit /Over temperature

    Operating temperature -30 to +60℃ (full r ated output up to 40℃)
    Humidity 95%, non-condensing
    Parallel operation Yes(not synchronized)
    ENCLOSURE
    PV terminals 2) 35 mm²/ AWG2 (Tr models)
    Battery terminals 35 mm²/AWG2
    Protection category IP43 (electronic components ),IP22 (connection area)
    weight 3kg
    Dimensions (h x w x Z) Tr models:248×178×103mm
    STANDARDS
    safety EC62109-1-2010

     

    1a) If more PV power is connected,the controller will limit input power to the stated maximum.

    1b) PV voltage must exceed  Vbat +5V for the controller to start. Thereafter minimum PV voltage is Vbat +1V.

    40,000.00
  • Epever 30Amps 12/24V MPPT Solar Charge Controller With Display

    EPEVER TRIRON “N” SERIES MODULAR MPPT SOLAR CHARGE CONTROLLER 30A 150V MAX PV INPUT 12V/24V BATTERY CHARGER

    The TRIRON series MPPT Solar Controllers are modular-designed products based on nine MPPT solar charge controller models.

    The main unit (Power Module) is a mppt charge controller which can be integrated with different display and interface modules to meet a variety of functional requirements.

    Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.

    Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile, TRIRON mppt charge controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the actual working value would not be higher than rated value).

    The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION mppt controller can be widely used in RV, telecommunication base station, household system, field monitoring.

    Technial Data:

    Model: Triron 4215N UCS/DS2

    Nominal System Voltage: 12V/24V Battery System

    Rated Charge Current: 30A

    Rated Discharge Current: 30A

    Battery Voltage Range: 8-32V

    Max PV Open Circuit Voltage: 150V at Min. operating environment temp.;138V at 25℃environment temp.

    Max PV Input Power: 520W(12v battery), 1040W (24v battery)

    Battery Type Supported: Sealed / Gel / Flooded;LiFePO4 / Li-NiCoMn / User , Lithium battery(LiFePO4 /Li-NiCoMn/User)

    Note:

    • Controller can not auto recognize system voltage when battery type is “lithium battery“, please confirm the system voltage before use.
    • There will be no Equalize Charge when the battery type is “lithium battery”
    47,000.00
  • Epever 40Amps 12/24/36/48V PWM Solar Charge Controller With Display

    Epever solar chaarge controller is a high quality, high-reliability international components brandwith Multiple load control modes. This controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can bewidely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

    It comes with a real time energy statistics function such as Segment LCD display design, Double USB design, Extensive electronic protection. The Series PWM charging mode features multiple load control mode.

    Features

    • Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
    • Terminals have UL and VDE certification, the product is more safer and more reliable
    • Controller can work continuously at full load within the environment temperature range from -25 to 55 °C
    • 3-Stage intelligent PWM charging:Bulk, Boost/Equalize, Float
    • Support 3 charging options: Sealed, Gel, and Flooded
    • LCD display design, dynamically displaying device’s operating data and working condition
    • Double USB design, the power supply charge for electronic equipment
    • With humanized button settings, operation will be more comfortable and convenient
    • Multiple load control modes
    • Energy statistics function
    • Battery temperature compensation function
    • Extensive Electronic protection

    Electronic protections:

    • PV reverse polarity protection
    • Battery reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery overheating protection
    • Controller overheating protection
    • Load short circuit protection
    • Load overload protection

     

    Technical specifications

    • Nominal system voltage: 12/24VDCAuto
    • Battery input voltage range: 9V~32V
    • Rated charge/discharge current:60A@55°
    • Max. PV open circuit voltage: 50V
    • Battery type: Sealed(Default) / Gel / Flooded /User
    • Equalize Charging Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V/User:9-17V
    • Boost Charging Voltage:Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V/User:9-17V
    • Float Charging Voltag:Sealed/Gel/Flooded:13.8V/User:9-17V
    • Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V/User:9-17V
    • Low Volt. Disconnect Voltage: Sealed/Gel/Flooded:11.1V/User:9-17V
    • Self-consumption: ≤10mA/12V;≤18mA/24V
    • Temperature compensation coefficient: -3mV/°/2V( 25°)
    • Charge circuit voltage drop: ≤0.29V
    • Discharge circuit voltage : drop ≤0.16V
    • LCD temperature range: -20°~+70°
    • Working environment temperature: -25°~+55°(Product can work continuously at full load)
    • Humidity range: ≤95%, N.C.
    • Enclosure: IP20
    • Grounding: Common Positive
    • USB input: 5VDC/2.4A
    • Overall dimension: 214×128.7×72.2mm
    • Mounting dimension: 205x100mm
    • Mounting hole size: Φ5mm
    • Terminals: 25mm2
    • Net weight: 1.02kg

     

    48,000.00

Shop By Department