The 60A 12/24V MPPT Controller from Fangpusun it uses the latest Continuous Maximum Power Point Tracking (MPPT) technology, which seeks out the maximum power available from a solar array. Voltage stepdown converter to be able to convert high PV voltages down to lower battery voltages of 12 and 24 volts. Connect a maximum of: 750 watts(@12V) , 1500 watts(@24V) to your batteries.IP43 rated, with no cooling fan and resin encapsulated electronics: Protects the electronic components against dirty and wet environments.Advanced Maximum Power Point Detection MPPT rapidly adjusts to changing weather conditions giving you 10% more power comparerd to slower MPPT Controllers. And in case of partial shading conditions two or more maximum power points may be present on the power-voltage curve and the greater of these will be found. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. Maximum efficiency exceeds 98%.Battery ChargingCharge voltage ‘absorption’ Default setting: 14,4V / 28,8V (adjustable)Charge voltage ‘float’ Default setting: 13,8V / 27,6V (adjustableAdjustable Battery Chargging Algorithim: Eight pre-programmed battery charge algorithms, selectable with a rotary switch. Seven Lead-acid battery settings and setting for Lithium Iron Phosphate Batteries(Li FePO4).All charging voltages are also individual adjustable in 0.1V increments using the remote monitorCompensates absorption and float charge voltage for temperatureProtectionsOver-temperature protection and automatic power derating when temperature is high.Battery reverse polarityPV short circuit and PV reverse polarity protection.PV reverse current protection.Maximum Open Circuit Voltage of Solar Module Range 100VMaximum Output Current 50AStandby power consumption: less than 10mATemperature compensation -16 mV / °C resp. -32 mV / °CTerminal Size fit up to 16mm2 cable AWG5Operating temperature: minimum -30C maximum 60CDimensions (h x w x d) 130 x 186 x 70 mmWeight 1.3kg₦105,000.00
fangpusun FLEXmax MPPT
The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from fangpusun.The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).
Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by fangpusun, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.
FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.
Increases PV Array Output by up to 30%
Advanced Continuous Maximum Power Point Tracking
Full Power Output in Ambient Temperatures up to 104°F (40°C)
Battery Voltages from 12 VDC to 60 VDC
Programmable Auxiliary Control Output
Built-in 128 days of Data Logging
Fully Network Integrated and Programmable
Text LCD display for operating parameters,fault messages,self test
Programming by buttons
Compliant with European Standards(CE)
Made in China
FLEXmax MPPT60 FLEXmax MPPT80 Nominal Battery Voltages 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up) Maximum Output Current 60 amps @ 104° F (40°C) with adjustable current limit 80 amps @ 104° F (40°C) with adjustable current limit Maximum Solar Array STC Nameplate 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts 48 VDC systems 5000 Watts / 60 VDC Systems 7500 Watts NEC Recommended Solar Anay STC Nameplate 12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts PV Open Circuit Voltage (VOC) 150 VDC absolute maximum coldest conditions /145 VDC start-up and operating maximum Standby Power Consumption Less than 1 Watt typical Power Conversion Efficiency 98.1% @ 60 Amps in at 48 VDC System voltage – Typical 97.5% @ 60 Amps in at 48 VDC System voltage – Typical Charging Regulation Five Stages: Bulk, Absorption, Float, Silent and Equalization Voltage Regulation Set points 10 to 80 VDC user adjustable with password protection Equalization Charging Programmable Voltage Setpoint and Duration – Automatic Termination when completed Battery Temperature Compensation Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell Voltage Step-Down Capability Can charge a lower voltage battery from a higher voltage PV array – Max 150 VDC input Programmable Auxilary Control Output 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC) Status Display 3.1″ (8 cm) backlit LCD screen – 4 lines with 80 alphanumeric characters total Remote Display and Controller Optional Mate or Mate2 with RS232 Serial Communications Port Network Cabeling Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires) Data Logging Last 128 days of Operation – Amp Hours, Watt Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production Hydro Turbine Applications Consult factory for approved Turbines Positive Ground Applications Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications) Operating Temperature Range Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C) Environmental Rating Indoor Type 1 Conduit Knockouts One 1″ (35mm)on the back; One 1″ (35mm) on the left side; Two 1″ (35mm) on the bottom Weight – Unit 5.3 kg 5.6 kg – Shipping 6kg 7.02 kg Dimensions – Unit 40 x 14 x 10 cm 44 x 14 x 10 cm – Shipping 46 x 30 x 20 cm 51 x 24 x 21.5 cm Options Remote Temperature Sensor (RTS), HUB 4,HUB 10, MATE, MATE 2 Menu Languages English & Spanish₦135,000.00